高效液相色谱指纹图谱应用于地黄的研究

利用高效液相色谱建立了地黄的色谱指纹图谱。采用反相C1 8柱 (5 μm ,1 5 0mm× 4.6mm) ,流动相甲醇∶水 (V V =5∶95 ) ,检测波长为 2 80nm ,流速 1 .0mL min进行实验。根据相对保留值和相对面积值对色谱指纹图谱进行分析对比研究 ,建立了控制地黄药材质量的新方法。该法为中药样品的鉴定提供了较全面的信息 ,并为HPLC在复杂组分的样品分析领域开拓了新的应用途径。     

红四氮唑作为电化学嵌合剂的核酸杂交生物传感器

提出了一种以红四氮唑 (TTC)作为嵌合剂 ,采用石墨修饰电极监测核酸杂交过程和测定特定 DNA片段的灵敏的电化学方法 . TTC具有背景电流低 ,电活性强和对双链 DNA(ds DNA)选择性好等一系列优点 ,可在石墨电极表面形成 ds DNA-TTC层 .在电化学测定中 ,TTC的还原电流与靶 DNA浓度具有良好的线性关系 ,对 DNA的检测限可低达 6× 1 0 - 1 1 mol/L .     

NCO自由基与SO_2、CS_2反应的速率常数

利用波长为266nm的激光光解CHBr3产生CH自由基,其与NO反应作为NCO自由基的来源.在298K,总压2660Pa的条件下,采用激光诱导荧光的方法,研究了NCO自由基与SO2、CS2的反应.得到了NCO自由基与SO2、CS2双分子反应速率常数分别为(1.8±0.3)×10-11和(3.1±0.4)×10-12cm3·molecule-1·s-1.对这两个反应在B3LYP/6-31 G(d)的水平上进行理论研究的结果表明,NCO自由基与SO2、CS2的反应是加成反应,其机理是NCO自由基中的N原子攻击反应物的中心原子,得到加成产物.     

Properties of nanobelts and nanotubes measured by in situ TEM.

Characterizing the physical properties of individual nanostructures is challenging because of the difficulty in manipulating the objects of sizes from nanometers to micrometers. Most nanomeasurements have been carried using scanning probe microscopy. In this article, we demonstrate that transmission electron microscopy can be a powerful tool for quantitative measurements of the mechanical and electrical properties of a single nanostructure. Dual-mode resonance of an oxide nanobelt has been observed, and its bending modulus has been measured. An in situ technique was demonstrated for measuring the work function at the tip of a carbon nanotube. The ballistic quantum conductance of a multiwalled carbon nanotube was observed at room temperature using the setup in TEM. It is concluded that in situ measurement by directly linking structure with property is a future direction of electron microscopy.     

甲基紫修饰的微晶酚酞分离富集-光度法测定痕量铋(Ⅲ)的研究

建立了以修饰有甲基紫(MV)的微晶酚酞作为固相吸附剂分离富集和测定环境样品中痕量Bi(Ⅲ)的新方法.研究表明,Bi(Ⅲ)与I-、 MV 形成三元离子缔合物[BiI6] (MV)3能定量吸附在微晶酚酞上,在适当条件下,Bi(Ⅲ)能与Co(Ⅱ)、 Ni(Ⅱ)、 Mn(Ⅱ)、 Fe(Ⅱ)、 Al(Ⅲ)、 Zn(Ⅱ)等常见阳离子分离,且基本不受Br-、 SCN-、 SO42-、 NO3-、 Cl-、 ClO4-等阴离子影响.Bi(Ⅲ)的静态吸附容量为0.81 mmol/g,富集因数可达200倍,回收率在97.2%以上,RSD 1.3%～2.2%之间.已应用于环境水样中Bi(Ⅲ)的测定.     

Physicochemical properties and catalytic performance of Pr2 − x SrxCoO4 ± y mixed oxides for NO reduction by CO

Using the polyglycol gel method, a series of Pr_{2 − x} Sr_xCoO_{4 ± y} (0.2 ≤ x ≤ 1.0) mixed oxides were prepared, and their catalytic activities were studied in the test reaction of NO reduction by CO. The solid-state physicochemical properties, including crystal structure, defect structure, IR spectrum, valence state of B-site ions, nonstoichiometry oxygen (y), oxygen species, and redox properties, were characterized by means of XRD, IR, TPD, TPR, XPS, and chemical analysis. The results show that all mixed oxides display a K₂NiF₄ structure. When x = 0.2 and 1.0, the obtained samples still have little uncertain mixed oxides; however, the mixed oxides (x = 0.4, 0.6, 0.8) all represent a single A₂BO₄ phase. With the increase of x, lattice parameters, unit-cell volume, and average crystalline size decrease gradually, whereas microstrain density, the concentration of Co³⁺, the amounts of lattice oxygen released and the concentration of oxygen vacancy increase. The catalytic activities of Pr_{2 − x} Sr_xCoO_{4 ± y} catalysts for NO reduction by CO are closely correlated with oxygen vacancy and the concentration of Co³⁺. Published in Russian in Kinetika i Kataliz, 2006, Vol. 47, No. 3, pp. 431–437. The text was submitted by the authors in English.     

SYNTHESIS OF POLY ( ETHER-URETHANE) CONTAINING PENDANT AMINO GROUP

This paper is concerned with the synthesis of poly (ether-urethane) with pendant amino groups. The copolyether produced by ring opening copolymerization of tetrahydrofuran and epibromohydrin was treated with sodium azide in dimethylformamide to form azido substituted copolyether. The poly (ether-urethane) made from it was subjected to reduction reaction to convert azido group to amino group. The stress-strain behavior and dynamic-mechanical properties of poly (ether-urethane) containing pendant amino groups were studied.     

金属材料分析方法的选择和施行第六讲金属材料中稀土元素的测定(续)

2.萃取分离-CPA-mA分光光度法测定稀土总量(摘自国家标准GB/T 223.49-1994)[适用范围]:碳钢、合金钢、高温合金及精密合金[测定范围]:w(∑RE)0.001%~0.20%[方法提要](1)试样溶解:按试样中总稀土的估计含量称取0.100 0~1.000 0 g试样,置于烧杯中,溶于适量的浓盐酸和浓硝酸的混合     

射频磁控溅射CNx薄膜的结构与衬底温度关系的研究

使用射频磁控溅射方法在不同衬底温度下（ts=室温，350，500℃）于Si(001)衬底上沉积了CNx膜，并利用拉曼（Raman)光谱、傅里叶变换红外光谱（FTIR）及X射线衍射光电子能谱（XPS）对CNx膜的化学结合状态与温度的关系进行了研究。Raman光谱结果表明，随衬底温度（ts) 增加，D带向低频方向移动，G带向高频方向移动；它们的半高宽分别由375和150cm^-1减小至328和142cm^-1；ID／IG由3．76减小至2.88。FTIR谱中除无序D带（1400cm^-1)和石墨G带（1570cm^-1)外，还有－700cm^-1,～2210cm^-1(C=N),2330cm^-1(C-O)及3255－3351cm^-1(N-H)等峰。XPS测试结果表明：随衬底温度增加，N与C的物质的量比由0.49下降至0.38，sp^2(C-N)组分与sp^3(C-N)组分强度比呈增大趋势。低温（350℃）退火并未对CNx膜的化学结合状态产生较大影响；高温（900℃）退火样品则显示出较好的结晶化程度。     

一种二帽pseudo-Keggin结构簇合物[HN(C_2H_5)_3]_3[N(C_2H_5)_3]_2[Mo_8~ⅣMo_4~ⅤV_2~ⅣO_(38)(PO_4)]的水热合成、结构和性质研究

金属－氧簇合物因其结构多样性及在催化、材料和医药等方面的应用而引起人们的关注犤１犦。在众多金属－氧簇合物中，Keggin结构及金属取代Keggin结构金属－氧簇被大量报道，但由于很难获得高质量单晶，有关二帽Keggin结构的报道非常少，目前只有几例报道犤２～９犦。近年来，随着水热法应用到金属－氧簇的合成，陆续获得了一系列具有新颖结构的簇合物。１９９８年，通过水热法获得了第一个二帽pseudo－Keggin结构簇合物犤NH４犦４H犤PMo８VⅣ４VⅤ２O４２犦·２４H２O犤１０犦。我们用水热法以三乙胺做模板剂获得了一种全新的二帽pse…